17
11. Align the probe manifold on the single-
u
se mixer system to the metal plate at
t
he front of the mixer tote and attach
the probe manifold clip.
When the shaft coupling is correctly located,
t
he ‘2 SHAFT’ light is illuminated on the UCI.
If the light is not on, refer to troubleshooting.
SHAFT interlock pin which will activate the UCI
light when the SUS is in the correct position.
12. Close and secure the door and check
'DOOR' interlock light is illuminated.
13. Turn the BAG INFLATION switch to the
‘ON’ position.
To Next Page
Loading...
Need help?
General
