Palmdoc II - About PalmDoc Test Strips

14
Owner’s Manual
About PalmDoc Test Strips
Key Functions of the Test Strip
PalmDoc II meters measure the amount of sugar
in the blood, commonly referred to as blood
glucose. Blood is applied to the opening of the
absorbent channel on the end of the test strip
and is automatically drawn into the test strip.
The test strip consists of the following parts:
Absorbent Channel
Apply a drop of blood and it will be
drawn in automatically.
Conrmation Window
Shows whether enough blood has been drawn
into the test strip’s absorbent channel.
Test Strip Handle
Hold this part to insert the test strip into the test
strip port on the meter.
Contact Bars
Insert this end of the test strip into the meter.
Push it in rmly until it will not go any further.
Figure 2
Palmdoc 2 User Man.indd 14 24/08/2017 10:49