Palmdoc II - Troubleshooting Guide

54
Owner’s Manual
Battery exhausted. Replace the batteries.
Battery incorrectly Check that the batteries
installed or absent. are correctly installed.
Test strip inserted Insert the test strip
upside down or correctly with the bar
incompletely. end entering into the
test strip port rst.
Defective meter. Please contact your
local distributor
for assistance.
v The test does not start after applying
the sample.
Insufcient blood Repeat the test using
sample. a new test strip with a
larger blood sample.
Probable Cause Actions
Probable Cause Actions
Troubleshooting Guide
v The meter does not display a message after
inserting a test strip
Palmdoc 2 User Man.indd 54 24/08/2017 10:49