58
Information About your PalmDoc II Meter
Comparing Meter and Laboratory Results
The test results you obtain from your meter may
differ somewhat from your laboratory results
due to normal variation. Meter results can be
affected by factors and conditions that do not
affect laboratory results in the same way (see
test strip package insert for typical accuracy and
precision data as well as important information
on limitations). To make an accurate comparison
between meter and laboratory results, follow the
guidelines below.
Before you go to the laboratory:
• Perform a control solution test to make sure
that the meter is working properly.
• It is strongly recommended to fast for at least
eight (8) hours before doing comparison tests.
• Take your meter with you to the laboratory.
While at the laboratory:
• Make sure that the samples for both tests (the
meter test and the laboratory test) are taken
and tested within 15 minutes of each other.
Palmdoc 2 User Man.indd 58 24/08/2017 10:49
To Next Page
Loading...