41
Voice Speaks: “Blood glucose 6.0 mmol/L.”
Repeat Feature: After test result is spoken, press
the “M” button to hear the result again.
This blood glucose result is automatically
stored in the meter memory. Turn the meter
off by removing the test strip. Discard the
used test strip carefully to avoid contamination.
Important: If you do not apply a blood
sample within (3) three minutes, the meter will
automatically turn off. You must remove the
test strip and re-insert it again to turn on the
meter and restart the test procedure.
Caution: If you cannot test due to a problem
with your testing supplies, contact your local
distributor. Failure to test could delay treatment
and/or lead to serious medical conditions.
Palmdoc 2 User Man.indd 41 24/08/2017 10:49
To Next Page
Loading...
