FOREST CRANE PALMS 840
V 1.03 EN 2012 Palmse Mehaanikakoda LLC 10
4.3 Mounting forest crane to the tractor with 3-point linkage system
Before mounting crane to the 3-point linkage (pos.1, fig. 6.1) make sure that:
tractor is heavy enough and will not keel over
tractor is placed firmly on even ground
tractor 3-point linkage equipment is in working condition
hydraulic hoses and couplings are not damaged
there is enough oil in tractor hydraulic system
Figure 6.1 3-point linkage junctions on FD support leg (B6)
Do not use hydraulic puller for connecting upper junction of 3-point
linkage!
Figure 6.2 Hydraulic puller
To Next Page
Loading...