FOREST CRANE PALMS 840
V 1.03 EN 2012 Palmse Mehaanikakoda LLC 1
1. GENERAL
This manual gives you a detailed overview about forest crane Palms 840. Read the
manual carefully before you start using this machine. The manual contains essential
directions for efficient and safe use of this equipment. These instructions should always
be followed. This forest crane is constructed for loading works in forestry and agriculture.
It can be mounted on Palms forest trailers by unified connection. This forest crane has
three point linkage system, by which it can be connected directly to agricultural tractors.
This machine meets all technical standards and safety regulations of EU Machinery
Directive and its amendments. Palms forest crane has CE marking.
Operator of forest crane is obliged to be aware of and strictly follow all safety precautions
and instructions described in this manual.
In addition to this, instructions of local occupational safety authorities, as well national
laws and regulations, must be followed.
Even if you are experienced user of this equipment, do not use it unless you have read
the user manual.
Using the machine for other tasks than those for which it is intended or exceeding its
performance is not allowed.
The manufacturer/dealer is not responsible for damage caused by misuse of the forest
crane.
Pay attention to regular maintenance. In case there will occur problems with forest crane,
which are not covered in this manual, contact authorized dealer or manufacturer.
Palmse Mehaanikakoda LLC reserves the right to make changes to user manuals and to
revise the data without prior notice.
To Next Page
Loading...