Panasonic A5N9 Series - Feedback Scale Connector X5; CS Signal Connector X6

No. SX-DSV02308 - 28 -
R1.0
Motor Business Unit, Appliances Company, Panasonic Corporation
7-6 Feedback Scale Connector X5
Name
Connector
pin no.
Description
1 EX5V (Note 2) (Note 3)
Power supply output for feedback scale
2 EX0V (Note 1)
3 EXPS
Feedback scale signal input / output
(serial signal)
4 /EXPS
5 EXA
6 /EXA
7 EXB
8 /EXB
9 EXZ
Feedback scale signal input
(A / B / Z phase signal)
10 /EXZ
Frame ground Shell FG
Note 1: EX0V power supply output for feedback scale is connected with the signal ground of the X4 connector.
Note 2: EX5V power supply output for feedback scale and E5V power supply output for CS signal are rated at 5.2 V
 5% and 300 mA at maximum. To use an feedback scale and CS signal with a current consumption higher
than that, a preparation of an external power supply is required. Some feedback scales may take longer time
in initialization after turning on the power.
Note 3: In case an external power supply is used for the feedback scale, make sure that the EX5V pin is open and no
external power is supplied to the EX5V pin.
7-7 CS signal Connector X6
Name
Connector
pin no.
Description
1 E5V
CS signal power supply output
2 E0V (Note 1)
Reserved 3 Do not connect.
4 CS3 signal input
5 CS2 signal input
CS signal I/O
6 CS1 signal input
Frame ground Shell FG
Note 1: E0V power supply output for feedback scale is connected with the signal ground of the X4 connector.
Connet the ground of CS signal to E0V.
Note 2:
EX5V power supply output for feedback scale and E5V power supply output for CS signal are rated at 5.2 V  5% and 300
mA at maximum. To use an feedback scale and CS signal with a current consumption higher than that, a preparation of an
external power supply is required.