Panasonic AG-DVX100BP - Adjustment Item for Video Level; DIF Status Display

INF-10
5-1-4. Adjustment item for Video Level
Y LEVEL
Y level of VIDEO OUT and S-VIDEO OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Luminance level adjustment in EVR adjustment.
C LEVEL
C level of VIDEO OUT and S-VIDEO OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Chroma level adjustment in EVR adjustment.
5-1-5. DIF Status Display.
NORMAL: The DIF STATUS display is updated every five frames.
FAST: The DIF STATUS display is updated every frame.
Factory default setting is “OFF”.
Items Description Remark
NODECNT Number of NODE connections.
MY_ID NODE ID of this unit.
ROOT_ID ROOT ID
IRM_ID PHY ID of IRM IRM(Isochronous Resonance Manager)
IN_CH Input channel number of Isochronous data.
OUT_CH Output channel number of Isochronous data.
DIFMODE DIF mode
RX_IN Received condition of Isochronous data.
O_BCC Transmitted condition of Isochronous data.
STYPE Type of VIDEO signal
FIELD NTSC/PAL
SPEED Speed of Isochronous data. IN_SPD in VCR MODE
UID USER ID of 1394 equipment
AS Source pack of AUDIO
ASC Source control pack of AUDIO
VS Source pack of VIDEO
VSC Source control pack of VIDEO
HEADER HEADER pack
Set the item “DIF INFO” to NORMAL
or FAST and it does ON/OFF of the
DIF STATUS display by pressing the
MODE CHECK button on normal
screen.
SERVICE MENU
CYLINDER 10000H
TAPE RUN 10000H
THREADING 10000T
Y LEVEL 1B
C LEVEL 27
DIF INFO OFF
DEBUG DISP OFF
DEBUG MODE OFF
PUSH MENU TO RETURN
OFF
NORMAL
FAST