- 133 -
∫ To use an AV cable for external output [AG-UX170]
1 Select the [AV OUT] menu.
2 Select the [RESOLUTION] menu.
≥ Images may not be displayed on the external device for several seconds in some cases, such as
when changing between scenes.
≥ When this unit and an external monitor are connected with an AV cable,
scenes with a [REC FORMAT] size of 4K (4096k2160) are not output.
≥ If the size in [REC FORMAT] is set to 4K (4096k2160), [RESOLUTION] cannot be set to [1080i]
or [DOWN CONV.]. If the size in [REC FORMAT] is set to a different value and [RESOLUTION] is
set to [1080i] or [DOWN CONV.]. the [RESOLUTION] setting will change to [SYSTEM].
≥ When [REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i], [RESOLUTION] is fixed to
[SYSTEM].
≥ [RESOLUTION] cannot be set during Freeze Frame. (l 91)
(If using )
≥ If you set [OUTPUT SEL] to [AV], [RESOLUTION] will be fixed to [DOWN CONV.].
≥ When the size in [REC FORMAT] is set to 4K (4096k2160), the following limitations apply:
j If you set [OUTPUT SEL] to [SDI], [RESOLUTION] will be fixed to [1080p].
j [OUTPUT SEL] cannot be set to [AV].
(If using )
≥ In the following cases, the video and audio are not output from VIDEO OUT terminal and AUDIO
OUT terminal:
j When an HDMI cable is connected to this unit
j When [RESOLUTION] is set to the settings other than [DOWN CONV.] (excluding when
[REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i])
: [OUTPUT SETUP] # [AV OUT] # [ON]
: [OUTPUT SETUP] # [RESOLUTION] # [DOWN CONV.]
MENU
AG-UX180
AG-UX170
AG-UX180ED(DVQP1171ZA)_E.book 133 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
