- 22 -
∫ Adjust the length of the hand strap so that it fits your hand.
Adjust the hand strap according to the size of your hand.
≥ If you find it difficult to fasten the buckle B, move the pad A forward, and fasten the buckle B
again.
∫ Attaching the eye cup
1 Align the mounting mark on the eye cup mount with the corresponding mark on
the eyecup.
2 Attach the eye cup so that the notch on the eye cup mount is aligned with the
protrusion inside the eye cup.
≥ Push the eye cup in until it reaches the mounting mark. (D)
1 Open the buckle.
2 Pull the end of the belt.
A Mounting marks
B Notch
C Protrusion
AG-UX180ED(DVQP1171ZA)_E.book 22 ページ 2016年11月28日 月曜日 午前11時32分