– 168 –
Chapter 8 Connecting to External Devices — Connection function via <USB2.0 DEVICE> or <USB3.0 HOST> terminal
Storage device types and available functions
The available functions differ depending on the storage device you will use. The storage device type is displayed after [PARTITION] on the left side of
the storage device explorer screen.
For details, refer to “Storage device information display (explorer screen)” (page 170).
r Storage device type
Storage device type Features
[TYPE S] A special format to read/write data with high speed by card.
[P2STORE] Indicates P2 STORE (AJ-PCS060G). Writing is disabled.
[FAT]
Storage devices where the primary partition is FAT16 or FAT32. The partition root or CONTENTS folder
under any folders* is the target.
[OTHER]
Indicates other storage devices other than the above. File systems other than FAT16 and FAT32, such as
NTFS.
* The hierarchy of folders is down to the third level and the maximum number of folders is 100. Long le names and le names with double-byte characters are not
supported. Examples of folder displays are shown below.
/CONTENTS Can be displayed.
/SAMPLE/CONTENTS Can be displayed.
/SAMPLE/20140101/CONTENTS Can be displayed.
/SAMPLE/20140101/1200/CONTENTS Cannot be displayed. (Cannot be displayed since this is a fourth level folder)
r Storage device types and available functions
Available functions
Storage device type
[TYPE S] [P2STORE] [FAT] [OTHER]
Thumbnail display
l l l
—
Card unit
Card*
1
→ Storage
l
—
l
—
Card*
2
→ Storage
— — — —
Storage → Card*
1
l l
— —
Storage → Card*
2
— — — —
Clip unit
Card → Storage
l*
4
—
l
—
Storage → Card
l l l
—
Playback check*
3
— — — —
Clip image display
l l l
—
Format
l
—
l l*
5
*1 P2 memory card, or microP2 memory card with 32 GB or lower
*2 microP2 memory cards that exceed 32 GB
*3 Playback from the storage device cannot be performed on the camera. Import the contents to the P2 card to play them back.
*4 If you perform additional clip writing, you will not be able to write back to that partition by card.
*5 Storage devices with a capacity of 2 TB or more cannot be formatted.
@@
NOTE
t Storage devices with capacities exceeding 2 TB (2048 GB) are not supported.
t Use a storage device within its guaranteed operational range (temperature, etc.).
t Do not place the storage device in a location that is unstable or subject to vibration.
t Use a storage device with sufcient capacity for copying.
t Because the storage device is very sensitive, reading, and writing data may become invalid depending on your usage. Please note that Panasonic has
no responsibility for data loss caused from a storage device failure or other defects and any direct or indirect damage related to these.
t If the contents of the storage device used for copying data from the camera are replaced using another computer, the camera operations and storage
device data cannot be guaranteed.
t For P2 cards containing defective clips, it is recommended that you copy data to a storage device after restoring in advance.
To Next Page
Loading...
