Panasonic AU-EVA1 - Page 75

– 75 –
Chapter 4 Operation — Menu setting contents
[COLOR SETTINGS]
[MAIN]
Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log] Sets to the gamma curve that can achieve gradation and wide latitude (exposure range). A grading process after recording is
required.
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
Sets to setting to perform detailed image quality adjustment with the camera.
When [SCENE1] to [SCENE5] is selected, the menu setting for the same scene number is enabled in the [SCENE FILE
SETTINGS] menu.
(Factory setting: [V-Log])
@@
NOTE
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this will be xed to [V-Log].
[SDI OUT]
Sets the output image from the <SDI OUT> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log] Outputs with the same color as the video recorded in the main recorder.
[V-709] Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
(Factory setting: [V-Log])
@@
NOTE
t When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], this will be xed to [V-Log].
[HDMI OUT]
Sets the output image from the <HDMI> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log] Outputs with the same color as the video recorded in the main recorder.
[V-709] Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
(Factory setting: [V-Log])
[LCD OUT]
Sets the output image from the <LCD> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log] Outputs with the same color as the video recorded in the main recorder.
[V-709] Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
(Factory setting: [V-Log])
[USER SWITCHES]
The function to assign the <USER 1> to <USER 9> buttons and multidial can be set.
For details, refer to “Assigning function to the USER buttons”.
Following functions can be assigned to [USER1] to [USER9].
f [INHIBIT], [AWB], [ONE PUSH AF], [ONE PUSH A.IRIS], [ATW LOCK], [E.I.S.], [D.ZOOM], [IR SHOOTING], [REC SW], [PRE REC], [REC CHECK],
[DEL LAST CLIP], [SLOT SEL], [EXPAND], [OPEN IRIS F.A.], [PEAK./SQUARES F.A.], [WFM], [SPOT METER], [ZEBRA], [LEVEL GAUGE], [LEVEL
GAUGE SET], [SDI COLOR], [HDMI COLOR], [LCD COLOR], [LCD CLEAN VIEW], [LCD MARKER], [COLOR BARS], [POWER LCD]
[USER1] Sets the function to assign to the <USER 1> button.
(Factory setting: [ONE PUSH AF])
[USER2] Sets the function to assign to the <USER 2> button.
Assigned function is enabled when the VIEW screen is displayed.
(Factory setting: [PEAK./SQUARES F.A.])
[USER3] Sets the function to assign to the <USER 3> button.
Assigned function is enabled when the VIEW screen is displayed.
(Factory setting: [SPOT METER])