Panasonic AU-EVA1 - Page 76

– 76 –
Chapter 4 Operation — Menu setting contents
[USER4] Sets the function to assign to the <USER 4> button.
(Factory setting: [E.I.S.])
[USER5] Sets the function to assign to the <USER 5> button.
(Factory setting: [WFM])
[USER6] Sets the function to assign to the <USER 6> button.
(Factory setting: [AWB])
[USER7] Sets the function to assign to the <USER 7> button.
(Factory setting: [SLOT SEL])
[USER8] Sets the function to assign to the <USER 8> button.
(Factory setting: [EXPAND])
[USER9] Sets the function to assign to the <USER 9> button.
(Factory setting: [OPEN IRIS F.A.])
[USER TOGGLE] Sets the function to assign to the multidial.
Assigned function is enabled when the VIEW screen is displayed.
The items that can be set are as follows.
f [INHIBIT], [SHUTTER], [FPS], [MONITOR VOL]
(Factory setting: [MONITOR VOL])
[SIDE LOCK]
[REC]
Sets if the REC button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [UNLOCK])
[USER1]
Sets if the <USER 1> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[USER2]
Sets if the <USER 2> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[USER3]
Sets if the <USER 3> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[USER4]
Sets if the <USER 4> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[USER5]
Sets if the <USER 5> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[USER6]
Sets if the <USER 6> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])