19
You may choose to protect the data on your computer from being accessed illegally or
overwritten accidentally by using a floppy disk. You can also set your computer to be
unbootable from a floppy disk.
Procedure
1 Run the Setup Utility ( page 41)
2 Using and , select [Security]
3 Using and , select [Boot Up Drive], then press Enter
4 Using and , select either [C:] or [CDD,DVD / A: / C:] and
press Enter
5 Using the and , select [Floppy Operation] and press
Enter
6 Using and , select [Disable] and press Enter
7 Press F10 , then select [Yes]
Preventing theft or damage to data using a floppy disk
Security Measures
To enable the floppy operation
Select [Enable] at Step 6.
To Next Page
Loading...
