Panasonic CS-PC18GKF

46
15 Disassembly and Assembly Instructions
15.1. Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor
Removal Procedures
15.1.1. To remove the Front Grille
• Remove the 3 caps and 3 screws at the bottom of the Front
Grille. (Fig. 1)
• Remove the Front Grille by releasing the 3 hooks at the top
of the Front Grille. (Fig. 1)
• Unhook the tabs at the Control Board to remove the Control
Board Cover. (Fig. 2)
Fig. 1
Fig. 2
15.1.2. To remove the Main Electronic Controller
• Release the 2 Particular Piece. (Fig. 3)
• Release the Indicator. (Fig. 3)
• Release the 2 screws for the earth wire. (Fig. 3)
• Release the screw Holder Terminal Board. (Fig. 3)
• Release the hooks that hold the Main Electronic Controller
and pull out the Main Electronic Controller. (Fig. 4)
Fig. 3
Fig. 4