Panasonic CS-RE9NKR - Operate and Display of Remote Control

23
11.3 Operate and Display of Remote Control
11.3.1 Original setting
11.3.2 Mode selecting button
A UTO, HEAT, COOL, DRY can be selected by pressing “MODE” button. Initial display of LCD is as follow
*Keeping the button depressed continuously, the operation mode will change in the following order in turn
AUTO—HEAT—COOL—DRY--AUTO
11.3.3 Temperature adjusting button
Temperature adjusting range is between 16 ℃~30 ℃
11.3.4 Fan speed button
There are 5 speed levels can be selected. The display on the remote controller changes as follows by pressing the AIR SWING
button.
11.3.5 Air swing button
To adjust vertical airflow directions by pressing AIR SWING button (5 options)
11.3.6 QUIET button and POWERFULL button
Start Quiet operation: Press QUIET button on remote control and then QUIET display on remote control display.
QUIET indicator on indoor unit lights up to identify Quiet mode has been activated.
Start Powerful operation: Press POWERUL button on remote control and then POWERFUL displays on remote
control display. POWERFUL indicator on indoor unit lights up to identify POWERFUL mode has been activated.
Switch Quiet /Powerful operation to normal operation: Press QUIET button or POWERFUL button on remote
control and then QUIET or POWERFUL disappears on remote control display. QUIET or POWERFUL indicator
blacks out, which identifies the unit returns to normal operation.
Note: QUIET and POWERFUL operation can not be active simultaneously.