Panasonic CU-MC140KE - Cross Flow Fan Removal

– 38 –
MAC9611041C2
CS-MC90KE
● Cross Flow Fan Removal Procedure
1. Remove the Indoor Fan Motor.
(Refer to the removal procedure of the Indoor Fan
Motor.) (Fig. 9)
2. Remove the Air Discharge Grille by taking off the
screws that hold the Air Discharge Grille and then
pull the Air Discharge Grille in a down and forward
direction. (Fig. 10)
3. Pull off the Bearing at the left of the Cross Flow Fan.
(Fig. 11)
4. Take off the mounting tab on the left side of the Heat
Exchanger, pull the Heat Exchanger forward (left
side) and remove the Cross Flow Fan.
(Fig. 12)
Fig. 9
Fan Motor
Servicing Information
Fig. 11
Fig. 12
Heat exchanger mounting tab
Bearing
Fig. 10
Untitled-27 6/25/00, 5:34 PM38