Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium Aluminium
Fin Type Slit Fin Louver Fin
Row / Stage (Plate fin configuration, forced draft)
2 × 14 1 × 19
FPI 21 21
Size (W × H × L) mm 614 × 294 × 25.4 776.2 × 482.6 × 22
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60
(430 × 2)
Refrigerant (R-22) g (oz) — 720 × 2 (25.4 × 2)
Thermostat Electronic Control —
Protection Device — 2 Stage Overload Protector
Capillary Tube Length mm — 560
Flow Rate l/min — 16.7
Inner Diameter mm — 1.7
Air Filter Material
Style
(c.c) P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 30 µF, 370 VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 400 VAC (Upper unit) 1.0 µF, 400 VAC
(Lower unit) 1.2 µF, 400 VAC
•
Specifications are subject to change without notice for further improvement.
13
CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE
To Next Page
Loading...
