Panasonic CZ-RTC5B

44
(EN)
Temp sensor
5
▲ ▼ → →
(Press 2 times to nish.)
• Select the temperature sensor to
control the room temperature.
Temp
sensor
Remote
controller
Indoor unit
Main/sub
5
▲ ▼ → →
(Press 2 times to nish.)
• When 2 remote controllers are
connected to the same indoor unit,
this registers one remote controller
as [Main] and the other as [Sub].
(There is no difference in function
between Main and Sub, however,
when the remote controller sensor
is selected for the temperature
sensor setting, the [Main] sensor
controls the operation.)
Vent output
5
▲ ▼ → →
(Press 2 times to nish.)
• [Set]: When the air conditioner is
turned ON/OFF, the connected
ventilation fan is turned ON/OFF,
too.
• To interlock the air conditioner
and the fan, another installation
work is required.
Contact address
5
Conrm.
Confirm, then
→
(Press 2 times to
nish.)
• If you need to contact for
servicing, check the back cover
of the operating instructions for
indoor units or outdoor units.
*To display each item, see steps 1 to 4 on the previous page.