When inspection is
required (P.57)
Appears if there is a problem on ECONAVI.
Top screen
Item selection screen Internal cleaning in process
(P.51)
Remote
controller
name (P.41)
Setting
information
icon
(Next page)
Operation guide (P.7)
Cursor
Operation
mode
Set
temperature
Fan speed
Flap
Lock screen display
[Operation lock] is
functioning. (P.40)
z To cancel lock
Press button for
4 seconds.
The indoor unit is stopped or slight blow operation is in process.
Part Names
Screen display
* Only the partial settings can be checked on the top screen. To check all the settings (P.55)
Operation is
locked. (P.40)
datanavi
outputting
(P.4)
Under operation of nanoe™ X
Present time &
day (P.40)
Appears when ECONAVI is being
set to ON. (ECONAVI settings
are possible only when tted with
ECONAVI panel/ECONAVI sensor.)
Operation stop screen
Operation guide (P.7)
To Next Page
Loading...
