20
RQT8853
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›]
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›]
Slow-motion Play
Frame-by-Frame Viewing
[RAM]
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
Use to skip in 1-minute or 10-minute increments.
Time Slip
Create Chapters
, to select the time, then
ENTER
– Each press of or advances the interval
by 1 minute (press and hold for 10-minute
intervals).
While paused
or
– There are 5 slow-motion speeds. Each press
increases the speed.
– Press [ PLAY] to restart normal playback.
While paused
ENTER
– Each press shows the next or previous frame.
– Press and hold to advance or reverse frame-by-
frame in succession.
– Press [ PLAY] to restart normal playback.
Available audio will differ based on disc type. See below.
e.g.: [RAM]
“Stereo” is
selected.
[RAM] [-RW‹VR›] and DivX
Stereo Mono L Mono R
[RAM] [-RW‹VR›] When playing an analog multilingual
broadcast, you can choose between Main Audio and
SAP Audio.
Main Audio SAP Audio
[DVD-V\
This allows you to change items like the audio channel
number and the soundtrack language (¼ 42).
Soundtrack
1 ENG
e.g., English is the selected language.
Changing Audio during Playback
to select the audio.
Notes
If continued for approx. 5 minutes, slow-motion play pauses
automatically (except [DVD-V]).
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
Skips 1-minute forward with each press.
CM Skip
During playback
CHAPTER
CREATE
Tips
You can skip to the start of a chapter by pressing [, ].
Notes
If you cannot change the audio type when you have used only
an optical digital audio cable for connection, set “Dolby Digital” to
“PCM” (¼ 50). Alternatively, you may connect to an amplifi er or
system component with an audio cable and change the input on the
amplifi er or system component to suit the connection (¼ 60).
During playback
TIME SLIP
M5821.indb20M5821.indb20 2007/02/2616:37:522007/02/2616:37:52
To Next Page
Loading...
Need help?
General
