43
RQT8853
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V]
[-RW‹VR›] and DivX
Picture
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›]
Set picture mode
Normal: Default setting
Cinema: Mellows movies, enhances detail in dark scenes.
DNR (Digital Noise Reduction)
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] and DivX
“On” reduces noise and picture degradation.
Progressive [Only when you have selected “480p” in
“TV Type” (¼ 65)]
Select “On” to enable progressive output.
Select “Off” if the picture is stretched horizontally.
When progressive output is on, you cannot use the TV’s closed
captions, but you can use this unit’s closed captions. Go to this unit’s
Setup menu to turn on closed captions (¼ 54).
Transfer [Only when you have selected “On” in
“Progressive” (¼ above)]
Select the method of conversion for progressive output to suit the type
of material being played.
Auto1 (normal): Film and video contents are detected automatically
and converted properly.
Auto2: When using “Auto1” and video content is distorted
as shown below.
Line-in NR (Only when IN1 or IN2 is selected)
Reduces video tape noise during recording. Depending on the video
signal, jittering may occur.
On: Noise reduction works for any video input.
Off: Noise reduction is off. Select when you want to record input
as is.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V]
[-RW‹VR›] [CD]
Repeat play
This function works only when the elapsed play time is displayed.
Select the item for repeat play. Depending on the disc, the items that
can be selected will differ.
Select “Off” to cancel.
Signal meter
Allows you to check the strength of the digital broadcast signal.
Only the strength of the digital broadcast received through the
antenna is displayed accurately.
Position
Change where this menu screen appears on your TV.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V]
[-RW‹VR›] and DivX
V. Surround Sound (Dolby Digital with 2.0 or over
channels only)
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›]
This function does not work for SAP recordings.
Enjoy a surround-sound effect if you are using 2 front speakers (L/R)
only.
Turn off if it causes distortion.
Natural/Emphasis/Off
Dialog Enhancer (Dolby Digital, 3-channel or over only,
including a center channel)
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] and DivX
When “On”, the volume of the center channel is raised to make
dialogue easier to hear.
Play Menu
Video Menu
Audio Menu
Other Menu
Setting Menus
To Next Page
Loading...
Need help?
General
