43
RQT9126
Notes
Remaining tape time display
The displayed time is approximate.
The displayed time will be incorrect if you set the wrong tape
length in “Tape Length” in the Setup Menu (¼ 68) and if the tape
is of poor quality.
On-screen Display Indicators
VHS drive indicator
L and R indicators
The Left (L) and Right (R) indicators show which
sound mode is selected as follows:
L R (Stereo):
Hi-Fi stereo audio
L –:
Mono L audio of the Hi-Fi stereo audio
– R:
Mono R audio of the Hi-Fi stereo audio
– – (Normal):
Normal audio
Recording mode (¼24)
Operation status
Shows the tape counter and remaining tape time
Pressing [STATUS ] to cycle the display as follows:
No display Tape counter
Remaining tape time
Press [
DELETE] to reset the tape counter
(elapsed time) to “0:00.00”. The tape counter
is automatically reset when inserting a video
cassette.
Tips
To exit on-screen indicators
Press [STATUS ] several times.
The audio changes as follows
L R (Stereo) L R
No display (Normal audio track)
Changing Audio during Playback
To Next Page
Loading...
Need help?
General
