88
RQT9126
The playback screen fl ickers.
The video head is dirty.
75
The tape is old or damaged.
Check the “SQPB” setting.
−
68
Playback Issues VHS Play
Cannot hear the desired audio type.
Press and hold [STTL
] for about 5 or more seconds to select the audio.
43
There is noise when playing a video
tape.
Adjust the tracking.
42
The tape is old or damaged.
−
Playback Issues VHS Sound
Page
Page
On-screen display indicators do not
appear.
Select a setting other than “Off” in “On-Screen Messages” in the Setup
Menu.
– Press [STATUS ] to show the on-screen display indicators.
43, 66
The grey background appears
during playback.
You are playing a blank or poor quality portion of the tape.
−
You can damage the unit if you play dirty or damaged tapes and this can
cause the grey background to appear.
−
Playback Issues VHS Picture
Page
Troubleshooting Guide
To Next Page
Loading...
