EasyManua.ls Logo

Panasonic DMC-FZ18 - Page 115

Panasonic DMC-FZ18
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecting to other equipment
115
VQT1G06
Connect the USB connection cable with
the [ ] mark facing the [] mark on
the [DIGITAL] socket.
Hold the USB connection cable at
and insert straight in or take straight
out.
If the mode dial is not set to [ ] when
the camera is connected to the printer,
disconnect the USB connection cable, set
the mode dial to [ ] and then connect
the USB connection cable again.
(Depending on the printer, it may be
necessary to turn it off and then on again.)
Do not use any other USB connection
cables except the supplied one.
If a card is not inserted when the camera
is connected to the printer, you can
access the picture data on the built-in
memory. If a card is inserted, you can
access the picture data on it.
You cannot switch between the built-in
memory and the card while the camera is
connected to the printer. When you want
to switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable to
the printer again.
If you want to print the age in [BABY1]/
[BABY2] or [PET] in scene mode or the
number of days that have been passed
since the departure date in
[TRAVEL DATE], use the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the
PC. To print the name of [BABY1]/
[BABY2] or [PET] or text (comments)
which has been entered using
[TITLE EDIT], use
[PHOTOfunSTUDIO-viewer-]. For details,
refer to the operating instructions (PDF
file) of the software.
To find out more about PictBridge
compliant printers, contact your local
dealer.
w Selecting a single picture and printing
it
1 Press / to select the picture
and then press [MENU/SET].
The message disappears in about
2 seconds.
2 Press to select [PRINT START]
and then press [MENU/SET].
Press [MENU/SET] to cancel printing
halfway.
3 Disconnect the USB connection
cable after printing.
w Selecting multiple pictures and
printing them
1 Press .
2 Press / to select an item and
then press [MENU/SET].
PictBridge
1/6
MENU
100
_
0001
PLEASE SELECT
THE PICTURE TO PRINT
PRINT
SELECT
MULTI PRINT
MENU
SET
SINGLE SELECT
NUM. OF PRINTS
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECTCANCEL SET
MENU
PRINT START
1
OFF
MENU
SET
PictBridge
DPOF PICTURE
SELECT ALL
FAVORITE
MULTI SELECT
SELECT
CANCEL
SET
MENU
MENU
SET

Table of Contents

Related product manuals