Advanced (Recording pictures)
84
VQT1G06
Press [ ] to display the [REC] mode
menu and select the item to set. (P71)
Select a colour effect that matches the
recording conditions and your image of the
recording.
• When in intelligent auto mode [ ], only
[B/W] or [SEPIA] can be selected.
Press [ ] to display the [REC] mode
menu and select the item to set. (P71)
Select an effect that matches the recording
situation and your image of the recording.
• When you take pictures in dark places,
picture noise may become noticeable. If
picture noise becomes a problem, we
recommend that you take pictures after
increasing the setting for
[NOISE REDUCTION] or lowering the
setting for each of the items other than
[NOISE REDUCTION].
[COL.EFFECT]
Setting colour effects for the
recorded pictures
[OFF] This is the standard setting.
[B/W]
The picture becomes black and
white.
[SEPIA] The picture becomes sepia.
[COOL] The picture becomes bluish.
[WARM] The picture becomes reddish.
[PICT.ADJ.]
Adjusting the picture quality for
the recorded pictures
[CONTRAST]
[T]
Increases the difference between
the brightness and the darkness
in the picture.
[U]
Decreases the difference
between the brightness and the
darkness in the picture.
[SHARPNESS]
[T] The picture is sharply defined.
[U] The picture is softly focused.
MENU
SET
MENU
SET
[SATURATION]
[T]
The colours in the picture
become vivid.
[U]
The colours in the picture
become natural.
[NOISE REDUCTION]
[T]
The noise reduction effect is
enhanced.
Picture resolution may
deteriorate slightly.
[U]
The noise reduction effect is
reduced.
You can obtain pictures with
higher resolution.
To Next Page
Loading...
