Panasonic DMC-FZ18 - [Baby1];[Baby2]

Advanced (Recording pictures)
61
VQT1G06
• The picture size becomes 3M (4:3), 2.5M
(3:2) or 2M (16:9).
• [QUALITY] is automatically fixed to [ ].
• The resolution of the recorded picture
decreases because of high sensitivity
processing. This is not a malfunction.
• The focus range is 5 cm (Wide)/2 m (Tele)
to c.
• You can take pictures suitable for 4SM6S/
10M15 cm printing.
• You can set the flash to AUTO [ ] or
Forced ON [ ].
• When the flash is used, it becomes
relatively easier for “orbs” (the
phenomenon caused by the light
reflecting on dust in the air) to appear.
• The extra optical zoom and digital zoom
cannot be used.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P59)
This takes pictures of a baby with a healthy
complexion. When you use the flash, the
light from it is weaker than usual.
It is possible to set different birthdays and
names for [BABY1] and [BABY2]. You can
select to have these appear at the time of
playback, or have them stamped on the
recorded image using [TEXT STAMP]
(P102).
• The age of the baby can be printed out
using the [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] software on
the CD-ROM (supplied). To print out the
baby’s name, use
[PHOTOfunSTUDIO-viewer-]. [For details
on printing, refer to the operating
instructions (PDF file) of the software.]
w Birthday/Name setting
 Press /
to select [AGE] or [NAME]
and then press
.
 Press / to select [SET] and then
press [MENU/SET].
 Enter the birthday or name.
– Birthday:
/: Select the items (year/month/
day).
/:Setting.
[MENU/SET]: Exit.
–Name:
For details on how to enter
characters, read the [TITLE EDIT]
section on P100.
• When the birthday or name is set,
[AGE] or [NAME] is automatically set
to [ON].
w Display the age/name
 Press /
to select [AGE] or [NAME]
and then press
.
 Press / to select [ON] and then
press [MENU/SET].
• If [ON] is selected when the birthday
or name has not been registered, the
setting screen appears automatically.
• If [AGE] or [NAME] is set to [OFF]
even when the birthday or name
has been set, the age or name will
not be displayed. Before taking
pictures, set [AGE] or [NAME] to
[ON].
[BABY1]/[BABY2]
1
2
MENU
SET