Others
124
VQT1G06
w When not using the camera for a long
period of time
• Store the battery in a cool and dry place
with a relatively stable temperature.
[Recommended temperature:
15 QC to 25 QC,
Recommended humidity: 40% to 60%]
• Always remove the battery and the card
from the camera.
• If the battery is left inserted in the camera,
it will discharge even if the camera is
turned off. If the battery continues to be
left in the camera, it will discharge
excessively and may become unusable
even if charged.
• When storing the battery for a long period
of time, we recommend charging it once a
year. Remove the battery from the camera
and store it again after it has completely
discharged.
• We recommend storing the camera with a
desiccant (silica gel) when you keep it in a
closet or a cabinet.
w About the picture data
• Recorded data may be damaged or lost if
the camera breaks down due to
inappropriate handling. Panasonic will not
be liable for any damage suffered due to
loss of recorded data.
w About tripods
• When you use a tripod, make sure the
tripod is stable when this unit is attached
to it.
• You may not be able to remove the card or
the battery when using a tripod.
• Make sure that the screw on the tripod is
not at an angle when attaching or
detaching the camera. You may damage
the screw on the camera if you use
excessive force when turning it. Also, the
camera body and the rating label may be
damaged or scratched if the camera is
attached too tightly to the tripod.
• Read the operating instructions for the
tripod carefully.
Message Display
Confirmation messages or error messages
will be displayed on the screen in some
cases.
The major messages are described below
as examples.
[THIS MEMORY CARD IS LOCKED]
The Write-Protect switch on the SD
Memory Card and the SDHC Memory Card
are moved to [LOCK]. Move the switch
back to unlock it. (P15, 106, 111)
[NO VALID PICTURE TO PLAY]
Record a picture or insert a card with a
recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
Delete or overwrite the picture after
cancelling the protect setting. (P105)
[THIS PICTURE CANNOT BE DELETED]/
[SOME PICTURES CANNOT BE
DELETED]
Pictures not based on the DCF standard
cannot be deleted. If you want to delete
some pictures, format the card after saving
necessary data on a PC etc. (P111)
[NO ADDITIONAL DELETE SELECTIONS
CAN BE MADE]
You have exceeded the number of pictures
that can be set at one time with
[MULTI DELETE] (P34) or [MULTI] in
[TEXT STAMP] (P102)/[TITLE EDIT]
(P100).
Either delete the picture or stamp the
entered text or dates onto the picture, then
retry the operation.
More than 999 favourites have been set.
[CANNOT BE SET ON THIS PICTURE]
[TITLE EDIT], [TEXT STAMP] or DPOF
cannot be set for pictures not based on the
DCF standard.
[NOT ENOUGH SPACE ON BUILT-IN
MEMORY]/[NOT ENOUGH MEMORY ON
THE CARD]
There is no space left on the built-in
memory or the card.
• When you copy pictures from the built-in
memory to the card (batch copy), the
To Next Page
Loading...
