Others
119
VQT1G06
Others
Using the MC
Protector/ND Filter
The MC protector (DMW-LMC46; optional)
is a transparent filter which affects neither
the colours nor the amount of light, so it
can always be used to protect the camera’s
lens.
The ND filter (DMW-LND46; optional)
reduces the amount of light to
approximately 1/8th (equal to adjusting the
aperture value 3 increments) without
affecting the colour balance.
Attach the MC protector or ND
filter with the lens extended.
• Do not attach the MC protector and ND
filter at the same time.
• If the MC protector/ND filter are tightened
too much, you may not be able to remove
them. Do not tighten them too much.
• If the MC protector/ND filter are dropped,
they may be destroyed. Be careful not to
drop them when attaching them to the
camera.
• Be careful not to get a fingerprint, dirt, etc.
on the MC protector or ND filter when it is
attached, otherwise the focus may be
adjusted to the lens, resulting in the
subject being out of focus.
• MCW“Multi-coated”
NDW“Neutral Density”
Screen Display
In recording
Recording in programme AE mode [ ]
(Initial setting)
1 Recording mode
2 Flash mode (P40)
3 AF area (P25)
4 Focus (P25)
5 Picture size (P76)
6 Quality (P76)
In Motion picture mode (P65)
//// /
: Jitter alert (P27)
7 Battery indication (P23)
8 Number of recordable pictures (P132)
Available recording time
(P65):
9 Built-in memory (P15, 23)
: Card (P15, 23)
6
1/30
F2.8
10
8
9
45612 73
16
17
131415 1112
7
10
1
9
8
2
13 12 111415
4
3
R8m30s
To Next Page
Loading...
