EasyManua.ls Logo

Panasonic DMC-FZ18 - [Stabilizer]

Panasonic DMC-FZ18
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced (Recording pictures)
81
VQT1G06
When selecting [ ]
You can select AF areas as shown in the
following illustration by tilting the joystick
towards ///.
The spot metering target can also be
moved to match the AF area when using
[].
The following operations will return the AF
area to the previous position.
When the mode dial is set to intelligent
auto mode [ ]
When the power save mode is activated
When this unit is turned off
Press [ ] to display the [REC] mode
menu and select the item to set. (P71)
w About the jitter/movement detection
demonstration screen
Press [DISPLAY] to display [JITTER,
SUBJ. MOVE DEMO] when the
[STABILIZER] screen is displayed.
(Pictures cannot be recorded when the
[JITTER, SUBJ. MOVE DEMO] screen
appears.)
Press [DISPLAY] again to finish this mode.
Jitter detection demonstration
Movement detection demonstration
It is also possible to display this screen
using the quick setting (P71).
The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
We recommend using a bright subject
with high contrast for the subject
movement demonstration.
The jitter/movement detection
demonstration screen is an
approximation.
The camera uses movement detection
when automatically setting the ISO
sensitivity in the following cases.
In intelligent auto mode [ ].
In [INDOOR PORTRAIT] in [PORTRAIT]
mode.
In [NORMAL SPORTS], [OUTDOOR
SPORTS] and [INDOOR SPORTS] in
[SPORTS] mode.
In [BABY1]/[BABY2] and [PET] in scene
mode.
When [INTELLIGENT ISO] is set
The stabilizer function may not be
effective in the following cases.
When there is a lot of jitter.
When the zoom magnification is high.
In digital zoom range.
When taking pictures while following a
moving subject.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
MENU
SET

Table of Contents

Related product manuals