Panasonic DMR-E95H - Playing Recorded Video Contents: Editing and Audio; Editing Operations During Playback; Audio Playback Control

26
RQT7467
Playing back
Playing recorded video contents/Playing play-only discs
Refer to the control reference on page 24.
Press [AUDIO].
[HDD] [RAM] [VCD]
LR>L>R
^---------------}
[DVD-A] [DVD-V]
You can change the audio channel number each time you press the
buttons. This allows you to change things like the soundtrack
language (➡ page 30, Soundtrack).
[Note]
You cannot change the audio type in the following cases.
≥When a DVD-R disc is in the disc tray while DVD drive is selected.
≥When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM” (➡ page 49).
≥When “DVD-R Rec for High Speed mode” is set to “On” (➡ page 48).
Editing operations during play
Erase
[HDD] [RAM] [DVD-R]
1 Press [ERASE].
2 Press [2, 1] to select “Erase” and press [ENTER].
≥A title cannot be restored once it is erased. Make certain before proceeding.
≥You cannot erase while recording or transferring (dubbing).
Create Chapter
(➡ page 32, Title/Chapter)
[HDD] [RAM]
Press [CREATE CHAPTER].
The message screen appears for 5 seconds to confirm that a chapter is created.
≥Press [:, 9] to skip to the start of a chapter.
≥You cannot divide while recording or transferring (dubbing).
Changing audio
PLAY
L R
HDD
e.g., “L R” is selected
Soundtrack
1 ENG Î Digital 3/2.1ch
e.g., English is selected.
7467en.book26ページ２００４年４月２３日 金曜日 午前９時５１分