38
RQT7467
Transfer (Dubbing)
Transferring (dubbing) titles or play lists
[Note]
Titles and play lists recorded using a different encoding system from
the TV system currently selected on the unit cannot be transferred
(dubbed).
[HDD]
>
[RAM]
[HDD]
>
[DVD-R]
Preparation
Select the audio type for recording bilingual broadcast from
“Bilingual Audio Selection” (➡ page 49) when transferring (dubbing)
to a DVD-R.
1 Play the title or play list you want to
transfer (dub).
2 Press [DUBBING].
3 Press [2, 1] to select “Yes” and
press [ENTER].
≥The transfer (dubbing) speed and picture quality are set as
follows.
The recording mode changes to FR mode if the remaining disc
space is exceeded using one of the recording modes indicated
below.
[HDD]
>
[RAM]
:
High speed mode
[HDD]
>
[DVD-R]
:
[Note]
Titles and play lists cannot be transferred (dubbed) if they contain
digital broadcast that allow “One time only recording”.
[HDD]
,-.
[RAM]
[HDD]
>
[DVD-R]
You can order titles and play lists for transfer (dubbing) as desired as
well as select the speed and picture quality.
Preparation
Select the audio type for recording bilingual broadcast from
“Bilingual Audio Selection” (➡ page 49) when:
≥Transferring (dubbing) to a DVD-R.
≥When “Audio Mode for XP Recording” is set to “LPCM” (➡ page 49)
and you are transferring (dubbing) in XP mode.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select
“DUBBING” and press [ENTER].
≥If you are not going to change the registered list press [4]
several times (➡ step 7).
3 Press [3, 4] to select “Dubbing
Direction” and press [1].
1 Press [3, 4] to select “Source” and press [ENTER].
2 Press [3, 4] to select the drive and press [ENTER].
3 Press [3, 4] to select “Destination” and press
[ENTER].
The same drive as the transfer (dubbing) source cannot be
selected.
4 Press [3, 4] to select the drive and press [ENTER].
5 Press [2] to confirm.
4 Press [3, 4] to select “Dubbing
Mode” and press [1].
1
Press
[3, 4] to select “Format” and press [ENTER]
.
2
Press
[3, 4] to select “VIDEO” and press [ENTER]
.
3
Press
[3, 4] to select “Recording Mode” and press
[ENTER]
.
4
Press
[3, 4]
to select the mode and press
[ENTER]
.
5 Press [2] to confirm.
5 Press [3, 4] to select “Create List”
and press [1].
Select the transferring (dubbing) items and register on the list.
≥When transferring (dubbing) to DVD-R using high speed
mode, only items indicated with “ ” can be registered.
1 Press [3, 4] to select “New item” and press [ENTER].
2 Press [3, 4, 2, 1] to select “Video” or “PLAY LIST”
tab and press [ENTER].
One Touch Transfer (dubbing)
DVD-R Rec for High Speed mode setting
On Off
High speed mode Same recording mode used as when
recording the source title (XP–EP, FR).
≥Play lists are transferred (dubbed) in FR
mode.
VOLUME
CH
DIRECT TV REC
DVD
TV
AV
123
456
78
0
9
MANUAL SKIP
CH
CANCEL
INPUT SELECT
SKIP
STOP
PAU SE
PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CREATE
CHAPTER
TIMER
EXT LINK
PROG/CHECK
REC MODEERASE
REC
AUDIO
TIME SLIP
STATUS
DISPLAY
F
A B C
DUBBING
HDD DVD
SD/PC
3,4,2,1
ENTER
SUB MENU
DUBBING
∫
1
RETURN
FUNCTIONS
;
STATUS
:, 9
VIDEO Plus+
Numbered
buttons
DUBBING
High Speed mode is selected.
Is it OK to start?
Yes No
Transferring (dubbing) using the
transferring (dubbing) list
DUBBING
HDD
DVD
Select the dubbing direction.
1
2
3
Source
Destination
Cancel All
Dubbing Direction
Dubbing Mode
Create List
HDD > DVD
VIDEO High Speed
0
01/01
DUBBING
Create dubbing list.
Size: 0MB
Destination Capacity: 4343MB
No. Size
Previous
New item
Next
Set
ENTER
RETURN
1
2
3
Cancel All
Dubbing Direction
Dubbing Mode
Create List
Start Dubbing
HDD > DVD
VIDEO High Speed
Name of item
HDD
Create List
Select
Previous 02/02 Next
007
BBC 10/10 FRI
008 1200MB
BBC 11/10 SAT
- - -
ENTER
RETURN
- - -- - -- - -
PLAY LIST
Video
7467en.book38ページ２００４年４月２３日 金曜日 午前９時５１分
To Next Page
Loading...
