Panasonic DMR-E95H - On-Screen Menus and Status Messages: Playback and Sound; Changing Playback Sequence Settings; Adjusting Picture Quality Settings; Adjusting Sound Effect Settings

31
RQT7467
Playing back
This function works only when the elapsed play time is displayed.
§
Only when you have set “Progressive” to “On” in the SETUP menu
(➡ page 14).
Status messages appear on the television when you operate the unit
to show the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
≥Displayed information are examples.
Play menu—Change the play sequence
Repeat Play
≥All
≥Chapter
≥Group
≥PL (Play list)
≥Title
≥Tr ac k
[VCD] [CD] (excluding MP3 discs)
[HDD] [RAM] [DVD-R] [DVD-V]
[DVD-A] [CD] (MP3 discs only)
[HDD] [RAM]
[HDD] [RAM] [DVD-R] [DVD-V]
[DVD-A] [VCD] [CD]
Select “OFF” to cancel.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
Progressive
§
(➡ page 55)
Select “ON” to enable progressive output.
Select “OFF” if the picture is stretched horizontally.
Transfer
§
[When “Progressive” (➡ above) is set to “ON”.]
Select the method of conversion for progressive output to suit
the type of material being played (➡ page 55, Film and video).
When the output signal is PAL
≥Auto
≥Video:
Detects 25 frame-per-second film content and
appropriately converts it.
Select when using “Auto”, and the video
content is distorted.
When the output signal is NTSC
≥Auto1
(normal):
≥Auto2:
≥Video:
Detects 24 frame-per-second film content and
appropriately converts it.
Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second
film content. (Picture distortion may occur
depending on the content)
Select when using “Auto1” and “Auto2”, and
the video content is distorted.
Sound menu—Change the sound effect
V.S.S. [HDD] [RAM] [DVD-R] [DVD-V]
(Dolby Digital, MPEG, 2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
≥Turn V.S.S. off if it causes distortion.
≥V.S.S. does not work for bilingual recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
Status messages
REC
PLAY
NICAM
L R
DVD REC
HDD
13:50 XP18:53:50 11.10.
π T2 0:05.14 XP
π T1 0:00.10 SP
Remain
π
Selected drive/type of disc
TV audio type being received
(NICAM or MONO)
Recording or play status/input channel
Selected audio type
Play position within the title
Title number and elapsed time
during play/Recording mode
Date and time
Available recording time
and recording mode
No display
Recording drive/
Transfer (dubbing) progress indicator
Used HDD
space
Title number and elapsed time
during recording/Recording mode
7467en.book31ページ２００４年４月２３日 金曜日 午前９時５１分