Note:
When attaching Front Panel, in order to hook Cassette
Door Opener Lever to Cassette Door, push up cassette
door in the direction of arrow and insert a front panel.
14.6. FRONT JACK P.C.B. &
FL DRIVE P.C.B.
1. Remove one 5 screws (A) and unlock 5 Locking Tabs (A) to
remove FL Drive P.C.B. .
2. Remove one 3 screws (B) and unlock 2 Locking Tabs (B) to
remove Front Jack P.C.B. .
14.7. POWER P.C.B.
1. Disconnect 3 Connectors from Power P.C.B. .
2. Remove 5 Screws (A).
3. Remove Screw (B).
4. Lift up Power Unit vertically out of Tabs.
5. Open the Top Cover of the Shield Case.
6. Remove the 2 Screws (C).
7. Lift up Power P.C.B. out of the Tabs.
32
DMR-EH80VEG / DMR-EH80VEB
To Next Page
Loading...
