16.5. CHECKING AND REPAIRING OF HARD DISC DRIVE
1. Top Case
· Remove 4 Screws (A) on side and 3 Screws (B) on rear side
· Remove Top Case
2. Hard Disc Drive
· Take out HDD FFC from HDD Angle sideways
· Remove 2 Screws on HDD Angle
· Lift up HDD Angle together with Hard Disc Drive
· Put HDD with HDD Angle up side down so as not give a shock to HDD
· Remove 4 Screws from Hard Disc Drive
46
DMR-EH80VEG / DMR-EH80VEB
To Next Page
Loading...
