Panasonic DMR-EH80VEG - Checking and Repairing of SD Card PCB

16.6. CHECKING AND REPAIRING OF SD CARD P.C.B.
1. Top Case
· Remove 4 Screws (A) on side and 3 Screws (B) on rear side
· Remove Top Case
2. DVD-RAM
· Take out HDD FFC from HDD Angle sideways
· Remove 3 Screws (B)
· Lift up DVD-RAM Drive slightly
· Remove 4 Screws (A)
· Disconnect 2 Connectors from Digital P.C.B.
· Remove DVD Angle
· Connect 2 Connectors to Digital P.C.B.
3. SD Card P.C.B.
· Remove 2 Screws
47
DMR-EH80VEG / DMR-EH80VEB