14.14. HARD DISC DRIVE
Note:
When replacing with HDD (HARD DISC DRIVE) “UNFORMAT”
indication
is displayed and HDD (HARD DISC DRIVE) must be formatted.
· After “UNFORMAT” is is displayed on the FL display,
warning message for HDD format is appeared on the
TV screen.
· Select “YES” and press “ENTER” button on the
remote control; the HDD will be formatted automatically.
· After that all programme in the HDD will be lost.
How to format the HDD.
1. Remove 3 Screws from the Rear Panel.
2. Disconnect HDD Power Cable from Hard Disc Drive Unit.
3. Take out HDD FFC from HDD Angle sideways and
disconnect the FFC from Hard Disc Drive Unit.
4. Remove 2 Screws (B) from HDD Angle.
5. Lift up HDD Angle together with Hard Disc Drive.
6. Put HDD with HDD Angle up side down so as not give a
shock to HDD.
7. Remove 4 Screws from Hard Disc Drive.
37
DMR-EH80VEG / DMR-EH80VEB
To Next Page
Loading...
