RQT8318
18
18
Timer recording
See also the notes “Important notes for recording” (➔ page 14).
Preparation
• Turn on the television and select the appropriate video input to suit
the connections to this unit.
• Check the time on the unit is correct.
• Insert a disc (➔ page 16).
Entering S
HOWVIEW numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers and magazines.
• You can enter up to 16 programmes up to a month in advance.
1 Press [ShowView].
2 Press the numbered buttons to enter
the SHOWVIEW number.
• To correct the number
Press [w] to move back to correct a digit.
3 Press [ENTER].
• Confirm the programme and make corrections if necessary
using [e,r,w,q] (➔ page 19, Manually programming timer
recordings, step 3).
• When “––––” appears in the “Name” column, you cannot set
timer recording. Press [e,r] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
• You can also press [REC MODE] to change the recording
mode.
• VPS/PDC (➔ page 20)
To activate the VPS/PDC function, press [e,r] to select
“ON”.
ON l OFF
If the broadcasting station is not transmitting VPS/PDC
signals, “---” appears.
• To enter programme name
Press [w,q] to select “Programme Name” and press
[ENTER] (➔ page 35).
4 Press [ENTER].
The settings are stored and the programme goes to timer
recording standby.
The timer icon is displayed in left column.
“z” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
■ Notes on timer recording (➔ page 19)
To exit the timer recording list
Press [PROG/CHECK].
Numbered
buttons
e,r,w,q
ENTER
g
ShowView
REC MODE
PROG/CHECK
A
RAM -R -R DL -RW(V) +R +R DL +RW
Using SHOWVIEW number to make
timer recordings
CANCEL
S
SUB MENU
ShowView
Record
Remain
8:12:34 7. 5. SUN
1:57 SP
Input ShowView Number 0-9, and press ENTER.
ENTER
RETURN
Number
--
0 9
To Next Page
Loading...
