RQT8318
43
ENGLISH
43
You can restart auto channel setting if the channel reception setting
(➔ page 11) fails for some reason.
After performing steps 1–4 (➔ page 42)
5 Press [e,r] to select “Auto-Setup
Restart” or “Download from TV” and
press [ENTER].
The confirmation screen appears.
Select “Download from TV” when you connect the unit to a
Q Link-compatible TV with a fully wired 21-pin Scart cable.
(Programme positions are downloaded from the TV and
copied through this convenient function.)
6 Press [w,q] to select “Yes” and
press [ENTER].
• If the Country setting menu appears on the television
Press [e,r,w,q] to select the country and press [ENTER].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [2 CH] and [CH 1] on the main unit until the
Country setting screen appears.
• All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording
programmes are also cancelled.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
List of TV Reception Channels
Only for 8 MHz channel raster
TV System
Refer to the control reference on page 36.
Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1 While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
press [ENTER].
3 Press [e,r] to select “Setup” and
press [ENTER].
4 Press [e,r] to select “Connection”
and press [q].
5 Press [e,r] to select “TV System”
and press [ENTER].
6 Press [e,r] to select the TV system
and press [ENTER].
• PAL (factory preset)
– Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are played
as PAL 60.
– Select to record television programmes and PAL input from
other equipment.
•NTSC
– Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
– Select to record NTSC input from other equipment.
The confirmation screen appears.
7 Press [w,q] to select “Yes” and press
[ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
■ To change the setting all at once (PAL l NTSC)
While stopped, press and hold [g] and [; OPEN/CLOSE] on the
main unit at the same time for about 5 seconds.
Automatic setting
Channel
Indication
TV Channel
Germany/Italy France Other Countries
2-4
E2-E10
2-4
E2-E12
5-10
5-10, G-J (172.00
to 220.00 MHz)
(INTER BANDE)
11-12
E11-E12
(Germany)
H1-H2 (Italy)
–
13-20 A-H (Only Italy) – –
21-69 E21-E69 E21-E69 E21-E69
74-78 S01-S05 – S1-S5
80 S1 – M1
81-89 S2-S10
B-F (100.00 to
172.00 MHz)
(INTER BANDE)
M2-M10
90-99 S11-S0
K-Q (220.00 to
300.00 MHz)
(INTER BANDE)
U1-U10
121-141
S21-S41
(Hyperband)
S21-S41 (299.25
to 467.25 MHz)
(INTER BANDE)
S21-S41
(Hyperband)
To Next Page
Loading...
