Getting started
VQT4C71
11
Control reference guide
Instructions for operations are generally described using the remote control.
1 Transmit the remote control signal
• Point it at remote control signal sensor on
this unit. (> 12)
2 Switch the unit from on to standby mode or
vice versa
3 Select drive (HDD, DVD, SD or USB)
4 Select channels and title numbers, etc./Enter
numbers or characters
5 To delete unwanted recorded titles, timer
programmes, pictures or music (> 35)
6 Basic operations for recording and play,
PAUSE LIVE TV (> 22)
7 Show Information (> 21, 30, 33)
8 Selection/OK, Frame-by-frame (> 33)
9 Show DIRECT NAVIGATOR, Top Menu (> 29,
34)
: Show OPTION menu (> 36, 48, 55)
; Colour buttons (Use in accordance with
instruction on the screen.)
< Start recording (> 23, 56)
= Select a conversion mode/recording mode
(> 23, 56)
> Show Teletext (> 22)
? Show subtitles (> 22, 34)
@ Create chapter (> 34)
A Skip the specified time (> 34)
B TV operation buttons (> 16)
C Channel select (> 20)/Change pages in the
DIRECT NAVIGATOR screen etc.
D Show the VIERA CAST screen (> 63)
E Input select (> 20, 56)
F Show the Timer Recording screen (> 26)
G Exit the menu screen
H Show the TV Guide screen (> 21)
I Show the FUNCTION MENU screen (> 19)
J Ret
urn to previous screen
K Show Setup menu (> 66)
L Flexible Recording via AV input (> 56)
M Show Playback Menu (> 64)
N Select audio (> 22, 34)
O Skip approx. 1 minute forward (> 34)
P Skip approx. 10 seconds backward (> 34)
Insert batteries
Insert so the poles (i and j) match those in the
remote control.
Remote control
To Next Page
Loading...
