Recording
VQT4C71
28
Timer recording
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 26)
3 Press [OK].
To show programme information
Press [STATUS ].
To exit the timer recording list
Press [EXIT].
To confirm and edit the timer
programme
Screen icons
F
Red: Timer recording standby is
activated.
Grey: Timer recording standby is
deactivated.
[ Currently recording programme.
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme, it was not
recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 26).
OK
Displayed if the recording can fit in the
remaining space.
>
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record
because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 94)
- programmes are deactivated, etc.
DMRXW390GL-VQT4C71_eng.book 28 ページ 2012年2月27日 月曜日 午前9時20分
Downloaded From Disc-Player.com Panasonic Manuals