Watching broadcasts
VQT4C71
22
Watching broadcasts
When “ ” appears in channel information
(> 21)
Press [STTL ].
• Press again to hide subtitle.
Press [AUDIO].
• Audio will switch according to the contents of
the programme every time it is pressed.
When “ ” appears in channel information
(> 21)
1 Press [TEXT ].
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• You can change the display mode. (> 66, 74, Teletext)
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 81)
When you pause a live TV programme, temporary
save starts. Then you can restart watching from
the paused position.
1 While watching TV:
Press [PAUSE ;].
2 When you want to resume:
Press [PLAY/a1.3 1].
• You can perform search or Quick View, etc.
Press [STATUS ] a few times.
1 Current time
2 The time when the picture currently displayed
on the television was broadcasted
3 The amount of time temporarily saved on
HDD.
To stop PAUSE LIVE TV
1 Press [STOP ∫].
2 Select “Yes”, then press [OK].
To hide the display information
Press [EXIT]
• Temporary save is stopped in following cases.
- When save time exceeds 8 hours (This may vary
depending on the HDD free space.)
- When save time exceeds 1 hour with no HDD free space
- When two programmes are recorded simultaneously
- When a timer recording from external input started.
(PAUSE LIVE TV from external equipment)
• The PAUSE LIVE TV function does not work
- The clock is not set.
- While two programmes simultaneous recording
- While watching a programme being recorded
- When a radio programme is selected
• You can operate this unit with the TV remote control by
using VIERA Link (> 62).
Refer to the TV operating instructions.
Operations while watching broadcast
To show subtitle
Switching audio
To show Teletext
Aspect
PAUSE LIVE TV
Display information
To Next Page
Loading...
