Recording
VQT4C71
25
Timer recording
To use TV Guide system
Refer to “Using TV Guide system”. (> 21)
To cancel a timer recording on the TV Guide
screen
1 Select the programme in the TV Guide, then
press [OK].
2 Select “Yes”, then press [OK].
(“F” in the TV Guide disappears)
To edit the timer recording on the TV Guide
screen
1 Select the programme in the TV Guide, then
press [OPTION].
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 26.
To edit the timer programme
Refer to “To confirm and edit the timer
programme”. (> 28)
Operation during Recording
Refer to “Operation during Recording”. (> 24)
• Some broadcast may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (> 26)
• The receipt of the TV Guide data via Set Top Box is not
possible.
• When timer recording from the external equipment, use
manual timer recording. (> 26)
• You can set the start and finish time to make the timer
recording work successfully. (> 71, Timer Record Start
Buffer, Timer Record Stop Buffer)
• This operation will only record to HDD.
• This unit can record two programmes being
broadcasted at the same time.
1 Press [GUIDE].
TV Guide screen appears.
e.g.,
2 Select the future programme, then press
[OK].
• Following screen is displayed when the
programme currently broadcasting is
selected.
Select “Timer Rec Set”, then press
[OK].
3 Confirm the programme and make
corrections if necessary using
[3, 4, 2, 1].
(> 26, Timer recording options).
To Next Page
Loading...
