Panasonic DMR-XW390

Getting started
VQT4C71
18
Settings
After completing “Easy setting”, you can continue
with “Network Easy Settings”.
1 Follow the on-screen instructions and make
the following confirmation.
- Network connection test
- Internet connection test
2 When “Network Easy Setting have been
finished.” appears.
Press [OK].
When you experience problems
Refer to “When you experience problems with
Network Easy Setting”. (> 91)
To restart Network Easy Settings
1 While stopped
Press [SETUP]. (> 16)
2 Select “Network Easy Settings” in “Network”,
then press [OK].
To redo settings individually
If “Network Easy Settings” did not work properly
or when you change the settings individually,
perform the following steps:
1 Press [SETUP]. (> 16)
2 Select “Network Settings” in “Network”, then
press [OK].
3 Refer to “Network Settings”. (> 75)

• Refer to the operating instructions of the hub or router.
Network Easy Settings
DMRXW390GL-VQT4C71_eng.book 18 ページ ２０１２年２月２７日 月曜日 午前９時２０分
Downloaded From Disc-Player.com Panasonic Manuals