Editing video
VQT4C71
38
Editing recorded titles
[HDD]
DR File Conversion is a function to convert the
recording mode of the title in DR mode. The size
of the converted title will be small regularly. It will
take about the same time as the recorded
duration.
1 Select “DR File Conversion” in “Edit”, then
press [OK].
e.g.,
2 Set the conversion options, then press [OK].
Recording Mode:
(> 7, Recording mode)
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the title, and will not be recorded if they are
not included.
•Off
Subtitle will not be recorded.
Timing:
•Now
Conversion begins immediately after step 4.
• Timer recording will not be performed
during conversion.
• During standby
Conversion will be performed after the unit is
switched to standby mode.
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “DR > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–3 (> 36)
1 Select “DR File Conversion” in “Edit”, then
press [OK].
2 Select “Yes”, then press [OK].
DR File Conversion
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
“COPY” on the unit’s display remains lighted
during conversion.
To Next Page
Loading...
