Panasonic DMR-XW390

Convenient functions
VQT4C71
76
Changing the unit’s settings
Home Network ( DLNA ) Settings
You will be able to access this unit from
Panasonic DLNA compatible equipment on
the network by registering them to this unit.
(> 59)
It is also possible to change the name of this
unit on the network.
• To register the equipment
1 Select “Home Network ( DLNA )”, then
press [OK].
2 Select “On”, then press [OK].
3 Select “Yes”, then press [OK].
4 Access this unit from the connected
DLNA compatible equipment within
10 minutes.
• Up to 4 devices can be registered.
• If you cannot register Panasonic equipment,
use “Server ( DLNA ) Settings”. (> right)
RETURN
Home Network ( DLNA ) Settings
Registered devices list
Set unit name
OK
Off
Home Network ( DLNA )
Server ( DLNA ) Settings
By allowing access from non-Panasonic
DLNA compatible equipment on the network,
it allows them to access this unit. (> 59)
• To register non-Panasonic equipment
1 Select “Server ( DLNA ) function”, then
press [OK].
2 Select “On”, then press [OK].
3 Select the MAC Address for the
connected equipment, then press [OK].
• Up to 12 devices can display the MAC
Address.
• Up to 4 devices can be registered.
4 Select “Yes”, then press [OK].
RETURN
Server ( DLNA ) Settings
MAC Address
OK
Off
Server ( DLNA ) function
DMRXW390GL-VQT4C71_eng.book 76 ページ ２０１２年２月２７日 月曜日 午前９時２０分
Downloaded From Disc-Player.com Panasonic Manuals