264
UF-9000
APR 2006
Ver. 3.0
DP-180/190
8 Options and Supplies
8.1. Service Notes "Firmware Update" for PCL or PS Option Installation
To use PCL (DA-PC190: UF-9000; DA-PC188: DP-180/190) or PS (DA-MC190: UF-9000; DA-MC188:
DP-180/190) option individually, changing to Type B or Type D SC firmware is required. The required
firmware is on the CD included with the options.
Note:
The 8 MB Expansion Board (DA-EM600) must be installed for the printer controllers above to function.
The only time a DA-EM600 is needed is if you are installing the PostScript (PS) or PCL option. There will
never be a need for 2 of these, even if there are other options, such as Fax, added.
Before proceeding, it is important to determine the Final Configuration of your machine in order to correctly
identify the required firmware from the table below. Carefully read, and follow the Installation Instructions for
the appropriate option.
The firmware for SC, and SPC must be updated in this sequence as a set. Please update the firmware with
the latest version as a set by referring to the following table.
Firmware Version Table (Select according to machine's production date)
Important Notice
The Firmware in the tables below are not interchangeable.
Firmware for machines with Serial No. prefix CF [March 2006] and above, cannot be used on machines with
Serial No. prefix BF [February 2006] and below for USA/Canada (may differ for other destinations).
For all DP-180/190, and UF-9000 starting with Serial No. prefix CF [March 2006], and above (Navy Blue
Control Panel) use the following firmware:
< Firmware Code File: UF-9000_AUR_xxxxxxxx.exe or DP-190_180_AUR_xxxxxxxx.exe >
New Navy Blue Color Light Blue Color
Standard Firmware
User Auth. (SC = Type A)
PCL Firmware
User Auth. (SC = Type B)
PostScript Firmware
User Auth. (SC = Type D)
SC
UF-9000
DX-TrirAxVxxxxx_xx DX-TrirBxVxxxxx_xx DX-TrirDxVxxxxx_xx
DP-180/190
DP-TrirAxVxxxxx_xx DP-TrirBxVxxxxx_xx DP-TrirDxVxxxxx_xx
SPC
DX-TRI-SAxVxxxxx āā
Slot 1 FROM PCB
Not Required Required Required