293
UF-9000
APR 2006
Ver. 3.0
DP180/190
8.9. Installing the Handset Kit (UE-403171/UE-403172)
8.9.1. Contents
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.9.2. Installation
CAUTION!
Turn the Power Switch on the Left Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Qty. Description Part No. Remarks
1 Cradle Assembly See Note
1 Handset See Note
1 Handset Cord DZFN000060
1 Installation Instructions DZSM000254 This document
(1) Hook the projections of the Cradle Assembly
into the holes on the Left Cover.
(2) Connect the Handset Cord to the Cradle
Assembly, and the Handset as illustrated.
(3) Fasten the Cradle Assembly Cable onto the
Hooks on the Rear Cover as illustrated.
(4) Remove the Protective Tab covering the
HANDSET Jack on the Rear Cover.
(5) Connect the Cradle Assembly Cord.
(6) Plug the AC Power Cord, and turn the Power
Switch on the Left Side of the machine to the ON
position.
(7) Reconnect the Telephone Line Cable if it was
disconnected.
To Next Page
Loading...
