289
UF-9000
APR 2006
Ver. 3.0
DP180/190
8.8. Installing the 2nd Paper Feed Module (DA-DS188)
8.8.1. Unpacking
Visually check the condition, and contents of the box for completeness, or any shipping damage
before installation.
Remove all filament tapes, and the packing materials used to secure the Unit during shipment.
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.8.2. Installation
CAUTION!
Turn the Power Switch on the Left Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Qty. Description Part No. Remarks
1 2nd Paper Feed Module -----
1 Bracket R PJULC0022Z
1 Bracket L PJULC0023Z
2 Bracket See Note
2 Leg Cushion PJHRB0701Z
8 Silver Screw See Note
2 Screw See Note
1 Installation Instructions PJQMB0132Z This document
(1) Remove the Rear Paper Tray Cover.
(2) Place the machine on top of the 2nd Paper Feed
Module aligning with the 2 Guides.
To Next Page
Loading...
